Septic tank maintenance

salt in septic system

Salt can Wreak havoc in an aerobic system

This article will cover how salt can Wreak havoc in an aerobic system. Any process can be improved. This applied to your home schedule and your home maintenance. Part of maintaining your home is making sure that your septic system runs efficiently. Turning it into an aerobic system is the ideal way to keep it optimal. The septic system has a septic tank that houses anaerobic bacteria that break down the solid waste products in the wastewater. The wastewater stays in this tan until a clear effluent is produced. The effluent then flows into the drain field so that the aerobic bacteria could break down minute solid waste particles that may still be left in the effluent. These bacteria also regulate the biomat that purify the effluent. Pathogens and toxic substances are removed by the biomat so that the pre-treated effluent could be used in the surrounding environment again. If you turn your septic system into an aerobic system, there are more aerobic bacteria present in the system. The aerobic bacteria see to it that all solid waste products are eliminated. They also prevent early deterioration in the septic.

Like any system, aerobic systems also suffer from problems. Clogging is one of the usual issues that you face. Clogging is brought about by several factors such as soil compaction, invasive root systems, and improper waste disposal. In an aerobic system, lack of inspection and salt accumulation could result to clogging. Hard water is the main reason why salt accumulates in your aerobic system. Hard water contains magnesium and calcium ions that make it difficult for soaps and detergents to lather up. This makes you repeat your washings and use too much soap, water, effort, and time. Using hard water alters your budget negatively because you have to pay higher water bills and buy more soap. When you use too much water, you stir up the solid waste particles in the tank. Bacteria cannot break them down at a normal pace when this happens. The solid paticles just float around I the tank until they are pushed into the drain field. This clogs the system. hard water also turns your soaps and detergents into sticky scum that clogs drains.

Dealing with hard water means that you have to use water softeners. Water softeners have beads that attract magnesium and calcium ions. The beads then flush them out of the water supply system. What remains in the water is the salt or sodium carbonate ions that soften the water. Softened water makes you wash tings easily. It also makes you save on water bills and soaps but in using water softeners frequently, you end up introducing more salt into your aerobic system. Understand how salt can wreak havoc in an aerobic system and you will have a lasting system. Salt, as you know, is a preservative that kills bacteria to make the organic substances last longer. If you have salt in your aerobic system, it kills both aerobic and anaerobic bacteria. There will be no wastewater treatment process anymore if this happens. Your aerobic system will surely fail if this is not corrected. When salt in the water softeners dominate the wastewater environment of the bacteria, the salt sucks out the fluids in the bacteria, killing them off. This will stop the process completely and you will have severe septic clogging. Once the solid waste particles accumulate heavily in the tank, the drain field will receive them all, turning your aerobic system into a failed system.

You should start using eco-friendly soaps and detergents when you start dealing with hard water. Harsh detergents will only help kill bacteria in your system. you should also see to it that the pump outs are regular. This will always refresh your aerobic system. It will also get rid of the salt that sticks to it. Have your aerobic system inspected regularly so that any damaged part can be easily repaired or replaced. Don’t forget to talk to your septic expert so that helpful additives can be introduced into your s=aerobic system. The additives will keep your system optimal even if you use water softeners all the time.

Salt can Wreak havoc in a raised mound system

This article will cover how salt can Wreak havoc in a raised mound system. You tend to overlook simple things when you are all excited about getting a house of your own. Oftentimes, new homeowners are surprised at the type of septic system installed in their property because they didn’t know about the type of soil that they have. For properties that have either too low or too high percolation rates, a specialized septic is recommended and installed—the raised mound system. The raised mound is exactly what it is—a raised mound. It is elevated because it needs to make room for more filters to help the soil treat the wastewater much faster and much more efficiently. A raised mound I also like the conventional septic system. It has a tank that gathers and pre-treats the effluent. It has anaerobic bacteria that break down solid waste particles so that the effluent will not have any particulates by the time it reaches the filters and the soil absorption area. It also has aerobic bacteria that regulate the boimat, which purifies the effluent before it is released into the surrounding environment.  Like the common septic, the raised mound system also experiences problems like clogging. Raised mound clogging can be caused by improper use of drains, toilets, and sinks, invasive roots, and errant disposal of waste. Another cause of clogging in the raised mound is the accumulation of salt in the system.

Salt accumulation happens when you experience hard water problems. Hard water has calcium and magnesium that do not allow your soap or detergents to lather up. This makes you repeat your washes, resulting to  more time, money, effort, and water  spent on washing chores. You spend more on water bills and soaps, so your budget is affected. The water load in the tank increases when you use too much water. It stirs up the solid waste particles so bacteria cannot degrade them at a normal pace. They just float in the tank until they clog the filters and the soil absorption area. Hard water also turns your soap into sticky, slimy scum that clogs drains. To face hard water problems, you need to use water softeners. They have beads that attract the calcium and magnesium ions so that they could be flushed out of the water supply system. What’s left are the sodium carbonate ions or salt ions that soften the water. Softened water makes washing a lot easier. With it, you will be able to accomplish washing chores much faster and much easier but there is a consequence to it. Salt accumulates in your raised mound system when you use water softeners too often. With this, you should understand how salt can wreak havoc in a raised mound system so that you could find ways on how you could make your wastewater system more efficient.

As you know, salt is a preservative. It kills bacteria so that the organic substance could last longer. Saltwater is not ideal for freshwater organisms such as your septic bacteria. They will definitely die off once they have more salt in their environment. The salt in the wastewater will suck out all the water from the bacterial bodies. You  should minimize the use of water softeners. Also talk to your septic expert so that helpful additives can be administered in your raised mound system. These additives will help your raised mound function optimally even if you have a hard water crisis.

Using eco-friendly detergents and soaps will also prevent more bacteria from dying. Harsh cleaners have strong bases and acids that kill bacteria. You should also make sure that you adhere to your pump out schedules so that the salt left in the system could be completely cleaned out. Hard water is a crisis because it makes it challenging to maintain your home. It can alter your budget and the amount of time that you spend on tasks. With the help of your septic expert, you could have a raised mound system that is more effective and more lasting.