This article will cover how salt can Wreak havoc in an aerobic system. Any process can be improved. This applied to your home schedule and your home maintenance. Part of maintaining your home is making sure that your septic system runs efficiently. Turning it into an aerobic system is the ideal way to keep it optimal. The septic system has a septic tank that houses anaerobic bacteria that break down the solid waste products in the wastewater. The wastewater stays in this tan until a clear effluent is produced. The effluent then flows into the drain field so that the aerobic bacteria could break down minute solid waste particles that may still be left in the effluent. These bacteria also regulate the biomat that purify the effluent. Pathogens and toxic substances are removed by the biomat so that the pre-treated effluent could be used in the surrounding environment again. If you turn your septic system into an aerobic system, there are more aerobic bacteria present in the system. The aerobic bacteria see to it that all solid waste products are eliminated. They also prevent early deterioration in the septic.
Like any system, aerobic systems also suffer from problems. Clogging is one of the usual issues that you face. Clogging is brought about by several factors such as soil compaction, invasive root systems, and improper waste disposal. In an aerobic system, lack of inspection and salt accumulation could result to clogging. Hard water is the main reason why salt accumulates in your aerobic system. Hard water contains magnesium and calcium ions that make it difficult for soaps and detergents to lather up. This makes you repeat your washings and use too much soap, water, effort, and time. Using hard water alters your budget negatively because you have to pay higher water bills and buy more soap. When you use too much water, you stir up the solid waste particles in the tank. Bacteria cannot break them down at a normal pace when this happens. The solid paticles just float around I the tank until they are pushed into the drain field. This clogs the system. hard water also turns your soaps and detergents into sticky scum that clogs drains.
Dealing with hard water means that you have to use water softeners. Water softeners have beads that attract magnesium and calcium ions. The beads then flush them out of the water supply system. What remains in the water is the salt or sodium carbonate ions that soften the water. Softened water makes you wash tings easily. It also makes you save on water bills and soaps but in using water softeners frequently, you end up introducing more salt into your aerobic system. Understand how salt can wreak havoc in an aerobic system and you will have a lasting system. Salt, as you know, is a preservative that kills bacteria to make the organic substances last longer. If you have salt in your aerobic system, it kills both aerobic and anaerobic bacteria. There will be no wastewater treatment process anymore if this happens. Your aerobic system will surely fail if this is not corrected. When salt in the water softeners dominate the wastewater environment of the bacteria, the salt sucks out the fluids in the bacteria, killing them off. This will stop the process completely and you will have severe septic clogging. Once the solid waste particles accumulate heavily in the tank, the drain field will receive them all, turning your aerobic system into a failed system.
You should start using eco-friendly soaps and detergents when you start dealing with hard water. Harsh detergents will only help kill bacteria in your system. you should also see to it that the pump outs are regular. This will always refresh your aerobic system. It will also get rid of the salt that sticks to it. Have your aerobic system inspected regularly so that any damaged part can be easily repaired or replaced. Don’t forget to talk to your septic expert so that helpful additives can be introduced into your s=aerobic system. The additives will keep your system optimal even if you use water softeners all the time.